  |
The Batch Burn Incinerator allows waste to be loaded into the primary chamber either manually or with a feeding ram, if so equipped. After the chamber is loaded with waste materials, the burn cycle is initiated.Once the burn cycle has begun, additional waste loading is inadvisable because exploding cans or bottles may injure the operator.During the batch burn cycle, waste burns under controlled air conditions for 8 to 12 hours. When the cycle has been completed, the unit shifts to a shut down cycle for final burn out and cool down. After cool down and the removal of ash and non-combustible items, the unit is ready to reload. |
Batch Burn Incinerators |
||||||||
|---|---|---|---|---|---|---|---|---|
Model |
Pyromizer |
751B |
1121B |
2151B |
3600 |
5200B |
8400B |
|
Unit Volume |
Primary Chamber (CU. FT.) | 35.3 | 75 | 112 | 215 | 360 | 520 | 840 |
| Secondary Chamber (CU. FT.) | 22.1 | 16.8 | 27.9 | 43.2 | 44.4 | 73 | 135 | |
Incinerator Only |
Length | 6' 3 3/16" | 11' 0" | 9' 9 3/16" | 10' 8 3/16" | 15' 5 3/4" | 15' 5" | 19' 1 1/8" |
| Width | 4' 8 3/8" | 4' 11 3/8" | 5' 11 3/8" | 6' 11 3/8" | 6' 10 3/8" | 7' 11 3/8" | 8' 11 3/8" | |
| Heigth | 7' 1 3/8" | 9' 1" | 8' 8 1/2" | 10' 2 1/2' | 11' 10 1/2" | 13' 6 3/4" | 15' 1 1/4" | |
| Stack Heigth (From Incin. Pad) | 23' 1 3/8" | 27' 11 3/8" | 27' 2 3/8" | 28' 8 3/8" | 31' 10 1/4" | 33' 6 1/4" | 35' 1 1/4" | |
| Pad Size | 8' 6" x 12' | 10' x 21' 3" | 11' x 20' | 11' x 21' | 12' x 27' | 13' x 26' 6" | 14' x 30' 9" | |
| Shipping Weight | 8800 | 14,600 | 17,800 | 24,800 | 40,100 | 47,650 | 78,300 | |
Incinerator with Loader |
Length | 27' 1/4" | 30' 1/2" | 30' 9 1/2" | ||||
| Width | 6' 10 3/8" | 7' 11 3/8" | 8' 11 3/8" | |||||
| Height | 11' 10 1/4" | 13' 6 1/4" | 15' 1 1/4" | |||||
| Stack Height (From Incin. Pad) | Not Available | 31' 10 1/4" | 33' 6 1/4" | 35' 1 1/4" | ||||
| Pad Size | 12' x 39' | 13' x 27' 6" | 18' x 42' 9" | |||||
| Shipping Weight | 45,800 | 53,250 | 83,700 | |||||
DO NOT USE FOR CONSTRUCTION. Construction Blueprints will be issued after receipt of order.
Note: All of the above units are designed to be used on a batch burn basis. Waste is loaded into the primary chamber manually. or with a ram feeder is so equipped, until the chamber is full, usually at the end of the day. The burn cycle is then initiated by turning a switch. After burn down the unit goes into a shut down cycle for final burn out and cool down. The following morning the small amount of ash and non-combustible is removed. It is then ready for another load. Opening of the loading of las-pak door on units manually loaded is discouraged during the burn period as exploding aerosol cans or glass bottles may cause injury to the operator.
For more information email simonds-mfg@earthlink.net
Home|Company Information|Pathological
Incinerators|Continual Burn Incinerators|The
Simonds' Guarantee
 |
| Simonds Manufacturing Corporation 209 Palmetto Street Auburndale, FL 33823 Phone: (863) 967-8566 Fax: (863) 967-8538 |